HAS-3000 Cyclone Aerator
Specially designed bubble cutting mode, with smaller bubbles and high oxygen utilization efficiency, maintains a stable DO value in the pool. The material is specially blended to increase product toughness while retaining sufficient strength. Mastering the conditions such as mold temperature and injection pressure, increasing the process of strengthening toughness, and ensuring stable and reliable product quality.
Product advantage
- Specially designed bubble cutting mode. The bubble is smaller and the oxygen utilization rate is high. DO value in the pool is maintained.
- The aerator resistance loss is almost zero, reducing blower failure and reducing comprehensive energy consumption by 10-30%.
- Large upwelling cyclone, strong stirring force, no oxygen-filled blind area, no silt deposit at the bottom of the pool, suitable for all kinds of high-concentration wastewater.
- It is non-plugging, anti-corrosion, and anti-ageing, suitable for corrosive, high-hardness, easy scaling, and other difficult sewage treatment.
- No movable and fragile parts, high strength, high toughness, stable performance, strong and durable, with a service life of 10-20 years.
- Large service area, small quantity used, low pipeline cost and high cost-effective
Longer service life:
The product is made of imported classic materials: nylon + glass fibre. The material is a special ingredient, which increases the toughness of the product while retaining sufficient strength.
-
According to project feedback, strengthen the stressed parts and vulnerable structures of the product.
-
The special production process, accurate control of mold temperature, injection pressure and other conditions, increase the toughness strengthening process.
- By the above three improvements, it can effectively avoid deformation and fracture during transportation, installation, and use of the product, and extend the service life.
Special bubble cutting mode:
-
The airflow is ejected from the nozzle at high speed, forming a strong negative pressure at the bottom of the aerator, and the sewage and activated sludge at the bottom of the aerator are sucked into the aerator to achieve the first efficient cutting.
-
The mixture flows through the spiral guide plate, and under the action of the rotary cutter, generating the violent vortex flow. This is the second efficient cutting.
-
Then, the spiral airflow is cut through the specially designed multi-layer cutting piece, after eight times multiple cuttings, a large number of mm air bubbles and some micro-nano air bubbles are produced, achieving the third efficient cutting.
-
The spiral flow jets from the swirl aerator with high speed, diffusing around under the action of centrifugal force, forming many small whirlpools in the flow field, achieving the fourth efficient cutting.
Environmech Sdn. Bhd.
since 2012 Co. Reg. No: (1007069-M)
For more information or enquiry, please contact Environmech Sdn. Bhd.
Contact us: http://www.environmech.com/p/contact-us.html Website: www.Environmech.com
