1. Introduction
ZG Sludge Scraper mainly apply for the settling tank whose diameter is no more than 20m. It consists of working bridge , drive mechanism , drive shaft , scraping arm and scum board , dragline , underwater bearing , agitating impeller , steady flow cylinder and electric cabinet. According to the actual condition , we can add effluent weir plate , skimming mechanism , slag tap and sludge hopper , etc.
When the ZG sludge scrapper working and running , its drive mechanism installed on the working bridge will drive up the transmission shaft for rotary. When the transmission shaft rotates , it will let the scraping arms on two sided rotate around the tank central axis. One set of scum board will rotate together with scraping arm , finally scraping out the settling sludge from the tank bottom to the sludge collecting tank. At the same time , if there is float scum , the skimmer will scrape it into sludge hopper.
2. Features
- The working bridge will adopt truss type , concise , beautiful and light.
- Easy from maintenance , low cost consumption.
- Drive reduce : cycloidal reducer , compact structure.
- For the electric components , we will use outdoor type , safe and reliable , stochastic control and remote control.
- We can make the unit according to client's requirement. Wetted parts can be Stainless Steel.
3. Technical Data Sheet
Environmech Sdn. Bhd.
since 2012 Co. Reg. No: (1007069-M)
For more information or enquiry, please contact Environmech Sdn. Bhd.
Contact us: http://www.environmech.com/p/contact-us.html Website: www.Environmech.com
