SLITTER
Slitter, also known as the sludge forming machine, is mainly used to cut the block or loose sludge into 6mm*5mm strips, and then transport it to the sludge dryer for drying treatment.
Slitter, also known as the sludge forming machine, is mainly used to cut the block or loose sludge into 6mm*5mm strips, and then transport it to the sludge dryer for drying treatment.
Core Structure and Function
- Upper and lower material level switch: a sensor used to control the amount of material in the silo.
- Bridge breaker device: Send the material down to the round knife, and at the same time, it can break the block material.
- Round knife: squeeze and cut the sludge into strips.
- Copper comb scraper: scrape the strip of sludge to the mesh belt.
Mechanismt
The sludge enters the silo, the bridge-breaking device sends the sludge down to the round knife, the round knife squeezes the sludge into a stronger strip, and then the copper comb scraper scrapes the strip sludge to the conveyor mesh belt.
Application Range
Application Range
It is suitable for the shaping of sludge, calcium carbonate production, titanium, carbon black, as well as filter-like materials such as pigments and dyes.
TECHNICAL PARAMETERS
Contact us: http://www.environmech.com/p/contact-us.html Website: www.Environmech.com
