Cautions for the Surface Aerator
Cautions during installing the SURFACE AERATOR
1. Install the surface aerator in the proper position according to the characteristics of the surface aerator and the size of the pool.
2. Check the fixing steel wires for the surface aerator are completely fastened and the flotation unit is in an inclined state.
3. Ensure the electric cables for the surface aerator are properly fixed. Generally, one of the electric cables is fixed with a hanging ring on the fixing steel wires according to the on-the-spot situation to prevent the wiring terminals from being damaged due to excessive pulling force of the electric cables.
4. Check the voltages and frequency of the power supply for the acceptor are consistent with those marked on the nameplate of the surface aerator.
Cautions during operating the SURFACE AERATOR
1. Check the voltages and frequency of the power supply for the acceptor are consistent with those marked on the nameplate of the surface aerator.
2. Ensure the capacity of the protective device for the control disc is consistent with the HP (kW) marked on the name plate of the surface aerator in order to protect the operating life of the surface aerator.
3. During operation, the control disc should be in the "AUTO" position, not in the "MANUAL" position to avoid no leap-offs due to overloads.
4. Make sure the operating electric current is within the rated current range marked on the name plate of the surface aerator during operation.
Contact us: http://www.environmech.com/p/contact-us.html Website: www.Environmech.com
