Selection guide for Vortex Pump (Supply at Semenyih - Environmech Sdn Bhd)



Selection Guide

  • Flow selection : 8 pump types from 0.3m3/h --60m3/h
  • Material selection: 304SS, 316SS, 316L, duplex stainless steel, hastelloy, titanium alloy
  • Structure selection: closed couple type and coupling type.
  • Machine seal selection: silicon carbide, pressureless sintered silicon carbide, ceramic, PTFE, fluoro rubber, can also be customized double-face machine sealing and rinsing system.
  • Selection Instructions: In order to provide customers with products that are perfectly suited to their needs, please confirm the following ordering:-

After understanding the working conditions, please select the appropriate pump type according to the performance curve. The performance curve is tested under the condition of a 20ºC normal water flow rate. Therefore, it is necessary to consider the changes in the specific gravity, viscosity, and density of the liquid when selecting the type. The characteristics of the pump are greatly affected by the connecting piping. If the piping is too long or the joints are too much, the loss of the heald will be large. Therefore, when designing the piping, the length of the connecting pipe and the use of the joint should be reduced as much as possible.


For more information or enquiry, please contact Environmech Sdn. Bhd.
Contact us: http://www.environmech.com/p/contact-us.html