Performance Feature for KA Series Air Knife & Air Knife Drying Systems (Coenda Adjustable Air Knife)
Main Material : 6061 T6 aluminium
The adjustment range of air blower : (0.3-3mm), cannot be adjusted before delivery
Sealing gasket material : food grade Teflon gasket
Standard blowing accuracy : full blade + 5%
Heat resistant temperature : 250°C
Wind speed of air knife : 20 - 200m/s
Pressure resistance : 2kgf/cm2
Weight (per 100mm length) : 400g
Surface treatment : Anodic treatment
Application fluid : air (air knife), water (spray water knife)
Feature :-
- The tool body is made of 6061 aluminium alloy, which has the characteristics of energy saving, high efficiency, practicality and reliability.
- The unique design of the structure ensures small wind resistance, average wind speed and uniform wind shape, the accuracy can reach + 5%.
- The maximum wind speed is 200m/s, the maximum temperature resistance is 250°C, and the maximum withstand voltage is 2kgf/cm2.
- High pressure fan, centrifugal fan, high-speed turbine fan, Roots fan, etc. Medium pressure fan as air source, flexible and convenient application.
- Equipped with a heater, it can be used for hot air drying, hot air rapid drying or sterilization.
- The width of the air outlet can be adjusted (0.3-3mm), various inlet diameters and positions can be selected for convenience installation. Customized length up to 3 meters.
- The KA series air knife is made of 6061 T6 aluminium alloy. It can obtain high speed airflow with very low pressure loss. The power consumption of the air blower required by the air knife is also greatly reduced. It is an energy-saving adjustable air knife.
- The blade curtain type can be blown out from the integral seam free blade. The accuracy range of left and right air speed error is within + 3.5% (except for the two outlets : 25mm).
- Compared with the EA series air knife, the KA series blade of air knife is flexible and adjustable. Even if the effect is different, it can adjust the blade size.
- The blade of the KA series air knife is high and low outlet air type. The outlet of the ait knife has the function of drainage and amplification, which can enlarge the air flow by 20-40 times and reduce energy consumption.
- All the fixed parts and screws of the KA air knife are made of SUS304 material. The air inlet form can be customized according to the use conditions. The upper, lower or both sides installation can be selected. In addition, the adjustment of the blowing angle of the air knife is also very simple. Note : The air inlet shape is adjustable (order product), the outlet is unchanged, and the size is different.
