Metering Pump (Malaysia) - Mechanical Diaphragm, Plunger type, Hydraulic Type Diaphragm

Mechanical Diaphragm Metering Pump

Definition

The diaphragm type metering pump uses a diaphragm to replace the piston,

realizes reciprocating motion under the action of the driving mechanism, and 

completes the pump for the suction and discharge processes.

Features

• No moving seal, no leakage.
• It can transport high viscosity media, abrasive pastes and hazardous chemicals.
• Cast aluminum housing, high heat dissipation and light overall weight.
• The diaphragm is pressed into a multi-layer composite structure, the first layer of super tough Teflon acid-resistant film, the second layer of EPDM elastic rubber, the third layer of thickness 3mm SUS304 supporting iron core, the fourth layer is reinforced with nylon fiber reinforcement, the fifth layer. It is fully packaged with EPDM elastic rubber, which can effectively improve the service life of the diaphragm.
• The pressure is generally less than 1.2Mpa.

Pump Head Configuration According to Different Application

JLM - Solenoid Metering Pump

PRODUCT CHARACTERISTICS

• Wear-free solenoid driving with no bearing.
• Adjustment both by stroke length and stroke speed.
• Intelligent LED display the stroke speed in percentage.
• Power: 110/220V 50~60Hz
• Material : PVC; PVDF; SS304; SS316

Parameter Table & Material Construction

Model	Flow (LPH)	Pressure (BAR)	Flow (GPH)	Pressure (PSI)	SPM	Diaphragm (mm)	Power (W)	Connection
JLM0110	1.0	10	0.26	145	80	34	28	5*8mm PE Hose
JLM0210	2.0	10	0.52	145	140
JLM0408	4.0	8.0	1.0	116	180
JLM0505	5.0	5.0	1.3	73	140	41
JLM0804	8.0	4.0	2.1	58	170
JLM1003	10	3.0	2.6	44	130	52
JLM1202	12	2.0	3.1	29	150
JLM1502	15	2.0	3.9	29	160
JLM2001	20	1.0	5.2	15	180

 

Material	PVC	PVDF	SS304	SS316
Diaphragm	PTFE	PTFE	PTFE	PTFE
Valve Body	PVC	PVDF	SS304	SS316
Valve Ball	Ceramic	Ceramic	Ceramic	Ceramic
Valve Seat	PTFE	PTFE	SS304	SS316
O Ring	Viton	Viton	PTFE	PTFE

JLM-P - Solenoid Metering Pump

PRODUCT CHARACTERISTICS

• Wear-free solenoid driving with no bearing
• Adjustment both by stroke length and stroke speed
• Intelligent LED display the stroke speed in percentage
• Power: 110 /220V 50~60Hz
• Material : PVC; PVDF; SS304; SS316
• Signal functions: 4~20mA signal or impulse signal

Model	Flow (LPH)	Pressure (BAR)	Flow (GPH)	Pressure (PSI)	SPM	Diaphragm (mm)	Power (W)	Connection
JLM-P0110	1.0	10	0.26	145	80	34	28	5*8mm PE Hose
JLM-P0210	2.0	10	0.52	145	140
JLM-P0408	4.0	8.0	1.0	116	180
JLM-P0505	5.0	5.0	1.3	73	140	41
JLM-P0804	8.0	4.0	2.1	58	170
JLM-P1003	10	3.0	2.6	44	130	52
JLM-P1202	12	2.0	3.1	29	150
JLM-P1502	15	2.0	3.9	29	160
JLM-P2001	20	1.0	5.2	15	180

Material	PVC	PVDF	SS304	SS316
Diaphragm	PTFE	PTFE	PTFE	PTFE
Valve Body	PVC	PVDF	SS304	SS316
Valve Ball	Ceramic	Ceramic	Ceramic	Ceramic
Valve Seat	PTFE	PTFE	SS304	SS316
O Ring	Viton	Viton	PTFE	PTFE

JLM-S - Solenoid Metering Pump

Model	Flow (LPH)	Pressure (BAR)	Flow (GPH)	Pressure (PSI)	SPM	Diaphragm (mm)	Power (W)	Connection
JLM-S0110	1.0	10	0.26	145	80	34	28	5*8mm PE Hose
JLM-S0210	2.0	10	0.52	145	140
JLM-S0408	4.0	8.0	1.0	116	180
JLM-S0505	5.0	5.0	1.3	73	140	41
JLM-S0804	8.0	4.0	2.1	58	170
JLM-S1003	10	3.0	2.6	44	130	52
JLM-S1203	12	2.0	3.1	29	150
JLM-S1502	15	2.0	3.9	29	160
JLM-S2001	20	1.0	5.2	15	180

Material	PVC	PVDF	SS304	SS316
Diaphragm	PTFE	PTFE	PTFE	PTFE
Valve Body	PVC	PVDF	SS304	SS316
Valve Ball	Ceramic	Ceramic	Ceramic	Ceramic
Valve Seat	PTFE	PTFE	SS304	SS316
O Ring	Viton	Viton	PTFE	PTFE

JBB - Mechanical Diaphragm Metering Pump

Main Parameter

• Flow range : 15-130LPH @ 50Hz / 18-180LPH @ 60Hz
• Pressure range : 4 - 10Bar
• Power : 380V / 220V @ 50Hz on standard, others on request DC12V or 24V is available
• Material : PVC; PVDF; SS304; SS316

Model	50Hz			60Hz			Pressure
	Flow (LPH)	Flow (GPH)	SPM	Flow (GPH)	Flow (LPH)	SPM	BAR	PSI	Diaphragm (mm)	Power (W)
JBB15 / 1.0	15	3.9	100	4.7	18	120	10	145	60	60
JBB25 / 1.0	25	6.6		7.9	30		10	145
JBB40 / 0.7	40	10	150	12	48	180	7	102
JBB60 / 0.6	60	60	100	19	72	120	6	87	84
JBB80 / 0.5	80	21		25	96		5	73
JBB100 / 0.4	100	26	150	32	120	180	4	58
JBB130 / 0.4	130	34		41	156		4	58

Model	PVC	PVDF	SS304 / 316
JBB15-JBB40	6*9 mm hose	RC ½" F	8*14mm welding union
JBB60-JBB130	DN15 glue union	RC ½" F	10*16mm welding union

KD - Mechanical Diaphragm Metering Pump

Main Parameter

• Flow range : 15-180LPH @ 50Hz / 18-173LPH @ 60Hz
• Pressure Range : 5-8 Bar
• Power : 380V @ 50Hz on standard, others on request
• Material : PVC; PVDF; SS304; SS316

Model	50Hz			60Hz			Pressure
	Flow (LPH)	Flow (GPH)	SPM	Flow (GPH)	Flow (LPH)	SPM	BAR	PSI	Diaphragm (mm)	Power (W)
KD15 / 0.8	15	3.9	48	4.7	18	58	8	116	60	180
KD20 / 0.8	20	5.2		6	24		8	116
KD40 / 0.8	40	10.5	96	12	48	115	8	116
KD60 / 0.6	60	15.7	48	18	72	58	6	87	95
KD80 / 0.6	80	21	96	25	96	115	6	87
KD120 / 0.5	120	31.5		37	144		5	73
KD180 / 0.5	180	47.3	144	56	216	115	5	73

Model	PVC	PVDF	SS304 / 316
KD15-KD40	6*9 mm hose	RC ½" F	8*14mm welding union
KD60-KD180	DN15 glue union	RC ½" F	10*16mm welding union

GM - Mechanical Diaphragm Metering Pump

Main Parameter

• Flow range : 10-500LPH @ 50Hz / 12-600LPH @ 60Hz
• Pressure range : 5 -12 Bar
• Power : 380V @ 50Hz on standard, others on request
• Material : PVC; PVDF; SS304; SS316

Model	50Hz			60Hz			Pressure
	Flow (LPH)	Flow (GPH)	SPM	Flow (GPH)	Flow (LPH)	SPM	BAR	PSI	Diaphragm (mm)	Power (W)
GM10 / 1.2	10	2.6	48	3.1	12	58	12	174	60	0.37
GM25 / 1.0	25	6.6		7.9	30		10	145
GM50 / 1.0	50	13	96	16	60	115	10	145
GM90 / 0.7	90	23	48	28	104	58	7	102	112
GM120 / 0.7	120	32		38	144		7	102
GM170 / 0.7	170	45	96	54	204	115	7	102
GM240 / 0.5	240	63		76	288		5	73
GM330 / 0.5	330	86	144	104	396	173	5	73
GM400 / 0.5	400	105		126	480		5	73
GM500 / 0.5	500	131		157	600		5	73

Model	PVC	PVDF	SS304 / 316
GM10-GM25	6*9 mm hose	RC ½" F	8*14mm welding union
GM50	DN15 glue union	RC ½" F	10*16mm welding union
GM90-GM120	DN15 glue union	RC ½" F	10*16mm welding union
GM170-GM330	DN15 glue union	RC ½" F	15*22mm welding union
GM400-GM500	DN15 glue union	RC ¾" F	15*22mm welding union

GB - Mechanical Diaphragm Metering Pump

Main Parameter

• Flow range : 240 - 1800LPH @ 50Hz / 288 - 2160LPH @ 60Hz
• Pressure range : 3 - 10 Bar
• Power : 380V @ 50Hz on standard, others on request
• Material : PVC; PVDF; SS304; SS316

Model	50Hz			60Hz			Pressure
	Flow (LPH)	Flow (GPH)	SPM	Flow (GPH)	Flow (LPH)	SPM	BAR	PSI	Diaphragm (mm)	Power (KW)
GB240 / 1.0	240	63	48	75	288	58	10	145	148	0.75
GB320 / 1.0	320	84		101	384		10	145
GB500 / 1.0	500	131	96	157	600	115	10	145
GB680 / 0.7	680	179		214	816		7	102
GB760 / 0.5	760	200	144	240	912	173	5	73
GB1000 / 0.4	100	264		315	1200		4	58
GB1200 / 0.4	1200	315	96	379	1440	115	4	58	185	1.1
GB1600 / 0.3	1600	421	144	505	1920	173	3	44
GB1800 / 0.3	1800	476		571	2160		3	44

Model	PVC	PVDF	SS304 / 316
GB240-GB1000	DN15 glue union	RC 1" F	RC 1"F
GB1200-GB1800	DN40 glue union	RC 1.5" F	RC 1.5"F

GB-S - Mechanical Diaphragm Metering Pump

Main Parameter

• Flow range : 1300-3600LPH @ 50Hz / 1560-4320LPH @ 60Hz
• Pressure range : 3-5 Bar
• Power : 380V @ 50Hz on standard, others on request
• Material : PVC; PVDF; SS304; SS316

Model	50Hz			60Hz			Pressure
	Flow (LPH)	Flow (GPH)	SPM	Flow (GPH)	Flow (LPH)	SPM	BAR	PSI	Diaphragm (mm)	Power (KW)
GB-S1300 / 0.5	1300	343	96	412	1560	115	5	73	148	1.1
GB-S1700 / 0.5	1700	449	144	539	2040	173	5	73
GB-S2000 / 0.4	2000	528		634	2400		4	58
GB-S2800 / 0.3	2800	740		888	3360		3	44	185
GB-S3600 / 0.3	3600	951		1141	4320		3	44

Model	PVC	PVDF	SS304 / 316
GB-S1300-2000	DN25 glue union	RC 1" F	RC 1"F
GB-S2800-3600	DN40 glue union	RC 1.5" F	RC 1.5"F

Plunger Type Metering Pump

Definition

A pump that periodically changes the volume of the working chamber by the reciprocating straight line of the plunger.

Main Features

• High pressure, up to 50Mpa
• High accuracy, the precision error within 1%
• For high viscosity, up to 2000cps
• Plunger made of ceramic or SS316 coated with ceramic
• Heat jacket or cooling jacket is available
• All model can be acquitted with auto stroke controller

Applications

Widely used in chemical, petroleum, metallurgy, electric power, medicine, food, plastic foam and other fields. It is especially popular in processes that deliver high viscosity, high pressure, and high temperatures.

Material Options

Parts : Standard material is SS304 or SS316, other materials on request.

Gear Box : Casting

JSX - Plunger Metering Pump

Main Parameter

Flow range : 1-195LPH @ 50HZ / 1.2-234LPH @ 60HZ

Pressure range : 1-400 Bar
Power : 0.37kw IEC71 4 pole Motor
Material : SS304; SS316, others on request

Model	50Hz			60Hz			Pressure		Piston (mm)	Stroke Length (mm)	Inlet & Outlet Caliber	Connection
	Flow (LPH)	Flow (GPH)	SPM	Flow (GPH)	Flow (LPH)	SPM	BAR	PSI
JSX1/30	1.0	0.26	40	0.3	1.2	48	300	4350	6	20	DN6	6*12 union for welding
JSX2/40	2.0	0.5	80	0.6	2.4	96	400	5800	6
JSX3/32	3.0	0.8		1.0	3.6		320	4640	8
JSX5/20	5.0	1.3		1.6	6		200	2900	10		DN8	8*14 union for welding
JSX8/14	8.0	2.1		2.5	9.6		140	2030	12
JSX15/7.6	15	4.0		4.8	18		76	1102	16
JSX25/5.0	25	6.6		7.9	30		50	725	20		DN10	10*16 union for welding
JSX40/3.2	40	11		13	48		32	465	25
JSX50/2.5	50	13		16	60		25	363	28
JSX70/2.0	70	18		22	84		20	290	32
JSX85/1.6	85	22		27	102		16	232	35
JSX100/1.3	100	26		32	120		13	189	38
JSX125/1.0	125	33		40	150		10	145	42
JSX150/1.3	150	40	120	48	180	144	13	189	38
JSX200/1.0	195	51		61	234		10	145	42

2J-X - Plunger Metering Pump

Main Parameter

Flow range : 5-300LPH @ 50HZ / 6-360LPH @ 60HZ

Pressure range : 1-400Bar

Power : 0.37kw IEC71 4 pole Motor
Material : SS304; SS316, others on request

Model	50Hz			60Hz			Pressure		Piston (mm)	Stroke Length (mm)	Inlet & Outlet Caliber	Connection
	Flow (LPH)	Flow (GPH)	SPM	Flow (GPH)	Flow (LPH)	SPM	BAR	PSI
2J-X5/40	5.0	1.3	96	1.6	6.0	115	400	5800	6	20	DN6	6*12 union for welding
2J-X8/32	8.0	2.1		2.5	9.6		320	4640	8
2J-X16/20	16	4.2		5.1	19.2		200	2900	10
2J-X25/14	25	6.6		7.9	30		140	2030	12		DN8	8*14 union for welding
2J-X40/5.4	40	10.6		12.7	48		54	783	16
2J-X60/3.5	60	15.9		19.0	72		35	508	20
2J-X100/2.2	100	26.4		31.7	120		22	319	25		DN10	10*16 union for welding
2J-X130/1.7	130	34		41	156		17	247	28
2J-X160/1.3	160	42		51	192		13	189	32
2J-X200/1.0	200	53		63	240		10	145	35
2J-X250/0.8	250	66		79	300		8	116	38
2J-X300/0.6	300	79		95	360		6	87	42

JSZ - Plunger Metering Pump

Main Parameter

Flow range : 6-600LPH @ 50HZ / 7.2-720LPH @ 60HZ

Pressure range : 6-400Bar

Power : 0.75kw IEC80 4 pole Motor
Material : SS304; SS316, others on request

Model	50Hz			60Hz			Pressure		Piston (mm)	Stroke Length (mm)	Inlet & Outlet Caliber	Connection
	Flow (LPH)	Flow (GPH)	SPM	Flow (GPH)	Flow (LPH)	SPM	BAR	PSI
JSZ6/40	6.0	1.6	96	1.9	7.2	115	400	5800	8	25	DN8	8*14 union for welding
JSZ10/25	10	2.6		3.2	12		250	3625	10
JSZ15/20	15	4.0		4.8	18		200	2900	12
JSZ25/10	25	6.6		7.9	30		100	1450	16
JSZ40/6.3	40	10.6		12.7	48		63	914	20
JSZ65/4.5	65	17.2		20.6	78		45	655	25		DN10	10*16 union for welding
JSZ80/3.6	80	21.1		25.4	96		36	522	28
JSZ110/2.8	110	29		35	132		28	406	32
JSZ130/2.3	130	34		41	156		23	334	35
JSZ160/2.0	160	42		51	192		20	290	38
JSZ190/1.6	190	50		60	228		16	232	42
JSZ210/1.4	210	55		66	252		14	203	45		DN15	15*22 union for welding
JSZ270/1.4	270	71		86	324		11	160	50
JSZ330/1.4	330	87		105	396		9	131	55
JSZ400/0.8	400	106	144	127	480	173	8	116	60
JSZ500/0.9	500	132		159	600		9	131	55
JSZ600/0.6	600	159		190	720		6	87	60

JSR - Plunger Metering Pump

Main Parameter

Flow range : 6.5-990LPH @ 50HZ / 7.8-1188LPH @ 60HZ

Pressure range : 10-500 Bar
Power : 1.5kw IEC90 4 pole Motor

Material : SS304; SS316, others on request

Model	50Hz			60Hz			Pressure		Piston (mm)	Stroke Length (mm)	Inlet & Outlet Caliber	Connection
	Flow (LPH)	Flow (GPH)	SPM	Flow (GPH)	Flow (LPH)	SPM	BAR	PSI
JSR6/50	6.5	1.7	96	2.1	7.8	115	500	7250	8	30	DN8	8*14 union for welding
JSR16/40	16	4.2		5.1	19.2		400	5800	12
JSR30/22	30	7.9		9.5	36		220	3190	16
JSR50/14	50	13.2		15.9	60		140	2030	20
JSR80/9.0	80	21.1		25.4	96		90	1305	25		DN10	10*16 union for welding
JSR100/7.5	100	26.4		31.7	120		75	1088	28
JSR130/5.6	130	34.3		41.2	156		56	812	32
JSR160/4.8	160	42		51	192		48	696	35
JSR190/4.0	190	50		60	228		40	580	38		DN15	15*22 union for welding
JSR225/3.2	225	59		71	270		32	464	42
JSR260/2.8	260	69		82	312		28	406	45
JSR330/2.3	330	87		105	396		23	334	50
JSR400/1.8	400	106		127	480		18	261	55		DN20	RF Flange
JSR480/1.6	480	127		152	576		16	232	60
JSR550/1.3	550	145		174	660		13	189	65
JSR650/1.2	650	172		206	780		12	174	70
JSR800/1.0	800	211	144	254	960	173	10	145	65
JSR1000/1.0	990	262		314	1188		10	145	70

JSD - Plunger Metering Pump

Main Parameter

Flow range : 23-3000LPH @ 50HZ / 28-3600LPH @ 60HZ

Pressure range : 6-500 Bar
Power : 3kw IEC100 4 pole Motor

aterial : SS304; SS316, others on request

Model	50Hz			60Hz			Pressure		Piston (mm)	Stroke Length (mm)	Inlet & Outlet Caliber	Connection
	Flow (LPH)	Flow (GPH)	SPM	Flow (GPH)	Flow (LPH)	SPM	BAR	PSI
JSD23/50	23	6.1	100	7.3	27.6	120	500	7250	12	40	DN15	TG Flange (WN)
JSD40/40	40	10.6		12.7	48		400	5800	16
JSD63/28	63	16.6		20.0	75.6		280	4060	20
JSD105/18	105	27.7		33.3	126		180	2610	25
JSD138/14	138	36.3		43.5	165		140	2030	28
JSD175/11	175	46.2		55.5	210		110	1595	32
JSD240/8.0	240	63.4		76.1	288		80	1160	38
JSD300/6.3	300	79.3		95.1	360		63	914	42
JSD360/5.5	360	95		114	432		55	798	45		DN20	RF Flange
JSD450/4.5	450	119		143	540		45	653	50
JSD540/3.8	540	143		171	648		38	551	55
JSD650/3.2	650	172		206	780		32	464	60
JSD760/2.6	760	201		241	912		26	377	65		DN25	RF Flange
JSD900/2.3	900	238		285	1080		23	334	70
JSD1050/2.0	1050	277		333	1260		20	290	75
JSD1200/1.8	1200	317		380	1440		18	261	80
JSD1350/1.6	1350	357		428	1620		16	232	85		DN32	RF Flange
JSD1500/1.4	1500	396		476	1800		14	203	90
JSD1680/1.2	1680	444		533	2016		12	174	95
JSD1850/1.0	1850	489		587	2220		10	145	100		DN40	RF Flange
JSD2050/0.8	2050	542	150	650	2460	180	8	116	105
JSD2500/1.0	2500	661		793	3000		10	145	95		DN32	RF Flange
JSD3000/0.6	3000	793		951	3600		6	87	105		DN40	RF Flange

JDR Serial Plunger Metering Pump

Main Parameter

Flow range : 92-6050LPH @ 50HZ / 110-7260LPH @ 60HZ

Pressure range : 8-500 Bar
Power : 5.5kw IEC132 4 pole Motor

Material : SS304; SS316, others on request

Model	50Hz			60Hz			Pressure		Piston (mm)	Stroke Length (mm)	Inlet & Outlet Caliber	Connection
	Flow (LPH)	Flow (GPH)	SPM	Flow (GPH)	Flow (LPH)	SPM	BAR	PSI
JDR92/50	92	24.3	96	29.2	110.4	115	500	7250	20	60	DN15	TG Flange (WN)
JDR145/32	145	38.3		46.0	174		320	4640	25
JDR190/25	190	50.2		60.2	228		250	3625	28
JDR240/20	240	63.4		76.1	288		200	2900	32
JDR390/15	390	102.0		123.0	468		150	2175	38
JDR430/11	430	113.6		136.3	516		110	1595	42		DN20	TG Flange (WN)
JDR520/9.0	520	137.4		164.9	624		90	1305	45
JDR650/8.0	650	171.7		206.1	780		80	1160	50
JDR780/6.5	780	206		247	936		65	943	55
JDR930/5.5	930	246		295	1116		55	798	60		DN25	RF Flange
JDR1100/4.6	1100	291		349	1320		46	667	65
JDR1300/4.0	1300	343		412	1560		40	580	70
JDR1480/3.5	1480	391		469	1776		35	508	75		DN32	RF Flange
JDR1700/3.0	1700	449		539	2040		30	435	80
JDR1920/2.8	1920	507		609	2304		28	406	85
JDR2150/2.4	2150	568		682	2580		24	348	90		DN40	RF Flange
JDR2400/2.2	2400	634		761	2880		22	319	95
JDR2680/2.0	2680	708		850	3216		20	290	100
JDR3250/1.6	3250	859		1030	3900		16	232	110		DN50	RF Flange
JDR3860/1.3	3860	1020		1224	4632		13	189	120
JDR4550/1.1	4550	1202		1443	5460		11	160	130
JDR5260/1.0	5260	1390		1668	6312		10	145	140		DN65	RF Flange
JDR6050/0.8	6050	1598		1918	7260		8	116	150

JT - Plunger Metering Pump

Main Parameter

Flow range : 186-14000LPH @ 50HZ / 223-16800LPH @ 60HZ

Pressure range : 6-500 Bar
Power : 11kw IEC160 4 pole Motor

Material : SS304; SS316, others on request

Model	50Hz			60Hz			Pressure		Piston (mm)	Stroke Length (mm)	Inlet & Outlet Caliber	Connection
	Flow (LPH)	Flow (GPH)	SPM	Flow (GPH)	Flow (LPH)	SPM	BAR	PSI
J-T180/50	186	49	93	59	223	112	500	7250	25	80	DN15	Flange  (WN)
J-T220/40	229	61		72	274		400	5800	28
J-T300/30	304	80		96	364		300	4350	32
J-T450/22	455	120		144	546		220	3190	38		DN20	Flange  (WN)
J-T550/18	556	147		176	667		180	2610	42
J-T780/12	788	208		250	945		120	1740	50
J-T1000/10	1000	264		317	1200		100	1450	55		DN25	Flange  (WN)
J-T1200/8.5	1200	317		380	1440		85	1233	60
J-T1400/7.5	1420	375		450	1704		75	1088	65
J-T1650/6.5	1665	440		527	1998		65	943	70		DN32	RF Flange
J-T1900/5.5	1910	505		605	2292		55	798	75
J-T2200/4.8	2200	581		697	2640		48	696	80
J-T2480/4.3	2485	657		788	2982		43	624	85		DN40	RF Flange
J-T2800/3.8	2800	740		887	3360		38	551	90
J-T3100/3.5	3130	827		992	3756		35	508	95
J-T3460/3.1	3468	916		1099	4161		31	450	100		DN50	RF Flange
J-T4200/2.6	4200	1110		1331	5040		26	377	110
J-T5000/2.2	5000	1321		1585	6000		22	319	120
J-T5800/1.8	5890	1556		1867	7068		18	261	130		DN65	RF Flange
J-T6800/1.6	6830	1804		2165	8196		16	232	140
J-T7800/1.4	7840	2071		2485	9408		14	203	150
J-T8900/1.2	8920	2357		2828	10704		12	174	160		DN80	RF Flange
J-T10000/1.1	10050	2655		3186	12060		11	160	170
J-T11300/0.9	11330	2993		3592	13596		9	131	180
J-T12600/0.8	12600	3329		3994	15120		8	116	190		DN100	RF Flange
J-T14000/0.6	14000	3699		4438	16800		6	87	200

Hydraulic Type Diaphragm Metering Pump 

Definition

Hydraulic diaphragm pump has a reciprocating diaphragm in a hydraulic oil chamber in place of a reciprocating piston inside a cylinder to produce the pumping action of the reciprocating positive displacement pump.

Main Features

• High pressure, up to 30Mpa
• High accuracy, the precision error within 1%
• No leakage
• Can transfer liquid temperature -20ºC to 100ºC
• Heat jacke or cooling jacket is available
• Including internal safety valve
• All models can be acquitted with auto stroke controller
• Double diaphragm with leakage detection is optional.

Applications

Generally used for strong corrosive, volatile, flammable and explosive, highly toxic, radioactive medium or precious metals. 

Material Options

Wetted Parts : Standard material is SS304 or SS316, other materials on request

Gear Box : Casting

Diaphragm : PTFE

JYSX - Hydraulic Diaphragm Pump

Main Parameter

• Flow range : 1.5 - 180LPH @ 50Hz/1.8 - 216LPH @ 60Hz
• Pressure range : 8 - 300 Bar
• Power : 0.37kw IEC71 4 Pole Motor
• Material : S304; SS316, other on request

Model	50Hz			60Hz			Pressure		Piston (mm)	Stroke Length (mm)	Inlet & Outlet Caliber	Connection
	Flow (LPH)	Flow (GPH)	SPM	Flow (GPH)	Flow (LPH)	SPM	BAR	PSI
JYSX1.5/30	1.5	0.4	40	0.5	1.8	48	300	4350	8	20	DN6	6*12 union for welding
JYSX2.2/20	2.2	0.6		0.7	2.64		200	2900	10
JYSX5.0/18	5.0	1.3	80	1.6	6	96	180	2610	10
JYSX8/14	8.0	2.1		2.5	9.6		140	2030	12
JYSX12/14	12	3.2	120	3.8	14.4	144	140	2030	12		DN8	8*14 union for welding
JYSX27/7.6	27	7.1		8.5	32.4		76	1102	16
JYSX40/5.0	40	10.5		12.6	48		50	725	20
JYSX65/3.2	65	17.1		20.5	78		32	464	25		DN10	10*16 union for welding
JYSX86/2.5	86	22.6		27.2	103.2		25	363	28
JYSX112/2.0	112	29.5		35.4	134.4		20	290	32
JYSX135/1.6	135	35.5		42.6	162		16	232	35
JYSX155/1.3	155	40.8		48.9	186		13	189	38
JYSX180/0.8	180	47.4		56.8	216		8	116	40

For more information or enquiry, please contact Environmech Sdn. Bhd.

Contact us: http://www.environmech.com/p/contact-us.html Website: www.Environmech.com