it indicates the pressure starts continuous
backwash limited number of five times, when more than limit cycles,
FILTRON16 will automatically stop, alarm output alarm signal.
According to the following figure, If I need to continue to run, simply click on
the (ENTER) key to disarm the alarm.
The third parameter pressure value. That is the actual pressure value is
greater than the set pressure value ,the keeping time more than stable
time ,then it will start backwash.
Such as : D.P.SET : 50M it represents the actual pressure is greater
than 50 meters (0.5Bar) held longer than settling time after start pressure
backwash.
greater than the set pressure value ,the keeping time more than stable
time ,then it will start backwash.
Such as : D.P.SET : 50M it represents the actual pressure is greater
than 50 meters (0.5Bar) held longer than settling time after start pressure
backwash.
For more information or enquiry, please contact Environmech Sdn. Bhd.
Contact us: http://www.environmech.com/p/contact-us.html
Website: www.Environmech.com
