1. Prior to installation or handling of the filter, read carefully the installation and operation
instructions.
2. Verify that the control panel is grounded. Also verify that the AC power cord is connected
to the control panel through 3 x 6A-fuse protector.
3. Verify that the filter housing is grounded to the appropriate location.
4. Confirm AC power disconnection prior to service.
5. Confirm filter draining prior to service.
6. Take precautions while lifting, transporting or installing the filter.
7. Installation and operation of the filter should be performed so as to avoid direct water
splashing on the control unit.
8. Confirm that filter weight, when full, meets the support construction requirements.
9. Prior to installation confirmation line pressure matches the filter's operating pressure.
10. During installation, use standard flanges and connections only.
11. Check that all filter flange bolts are properly secured.
12. Please note, the filter enters a CLEANING mode automatically, without prior warning.
13. Use original parts only, while servicing the filter.
14. No changes or modifications to the equipment are allowed.
15. Do not perform any maintenance activities other than those given in this manual.
ENMECH cannot accept responsibility for any changes or modifications to the equipment.
For more information or enquiry, please contact Environmech Sdn. Bhd.
Contact us: http://www.environmech.com/p/contact-us.html
