Periodical Checks (Figure 7)
Perform yearly Periodical Checks at the beginning of the season, according
to the following instructions:
1. Check the condition of the coarse screen. If defective, replace according
to "Coarse Screen Removal & Installation".
2. Check the condition of the fine screen assembly. If defective, replace
according to "Fine Screen Assembly Removal & Installation".
3. Check seal condition. Lubricate with silicon grease.
4. Remove the dirt collector according to "Dirt Collector Removal & Installation"
3. Check seal condition. Lubricate with silicon grease.
4. Remove the dirt collector according to "Dirt Collector Removal & Installation"
and check the dirt collector suction nozzles height (see table).
If defective, screw out the nozzle and replace with a new one.
5. Check the existence of grease on the spiral guide.
6. Check the filter housing for paint damage and corrosion. If required,
5. Check the existence of grease on the spiral guide.
6. Check the filter housing for paint damage and corrosion. If required,
clean the area with sandpaper and apply a thin layer of basic + epoxy paint.
7. Check for leaks.
7. Check for leaks.
For more information or enquiry, please contact Environmech Sdn. Bhd.
Contact us: http://www.environmech.com/p/contact-us.html
