Adjustment of the differential pressure indicator
As shown in figure (c).
When you adjust the differential pressure indicator values, please use a flat blade screwdriver
rotated Knob.
As shown in figure (c).
About this series filters, if the differential pressure over the 0.5bar and 0.7bar
in the inlet and outlet, which will start the filter to backwash.
When you set the differential pressure indicator values, as shown in Figure(c),
rotate the white knob to 0.5bar or 7psi position.
c. NOTE
The Differential pressure indicator have to single line, they are "D" and "P", there is no order
c. NOTE
The Differential pressure indicator have to single line, they are "D" and "P", there is no order
when they are connected to the controller.
When you adjust the differential pressure indicator values, please use a flat blade screwdriver
rotated Knob.
When you adjust the differential pressure indicator values, Don't put them numerically tuned too
high or too low，Otherwise it will affect the system's normal work.So it should be set at 0.5
bar or the location of the 7 psi.
high or too low，Otherwise it will affect the system's normal work.So it should be set at 0.5
bar or the location of the 7 psi.
For more information or enquiry, please contact Environmech Sdn. Bhd.
Contact us: http://www.environmech.com/p/contact-us.html
