Back washing process for Automatic self-cleaning disc water filter
1) A command from the control unit to the filter's inlet valve causes he valve to close the
filter' inlet and open the drain.
2) Filtered outlet water enters form the opposite direction through the outlet port of the filter.
3) The flaps of the membrane are opened by the water pressure, allowing the water to flow only
into the 3 flushing pipes.
4) The water is forced through nozzles built into the flushing pipes.
5) Water from the flushing pipes also flows into the piston and pushed the tightening cap up,
decompressing the filtration element discs.
6) Tangential jets of water cause fast spinning of the separated discs ans remove the trapped solids.
7) The solids are flushed from the filter to the drain.
For more information or enquiry, please contact Environmech Sdn. Bhd.
Contact us: http://www.environmech.com/p/contact-us.html
Website: www.Environmech.com
