|
Faults |
Failure Cause |
Solutions | ||
| Blower | Rotation | Overheat
| Exhaust pressure is rising abruptly | See*Note |
|
Temperature in motor room is exceed to 40°C | Increase the ventilation | |||
|
Sound absorber is blocked |
Clean/change filter | |||
| Airflow is not enough | Tubing leakage |
Screw up the connector | ||
|
Sound absorber is blocked | Clean/change filter | |||
| Safety valve leakage | Adjust safety valve | |||
| V belt is slipping | Adjust the tension of V belt | |||
| Exhaust pressure is rising abruptly | See*Note | |||
| Exhaust pressure is rising abruptly | Valve close | Fully open the valve | ||
| Water level is rising | Adjust the water level | |||
| Intake tube is blocked | Clean up the sundries | |||
| Tubing is blocked | Clean up the sundries | |||
| Valve is damaged or screwed up to the opposite direction | Change it or tighten it to the opposite direction | |||
| Air flow is too strong | Decrease the rotating speed or sir exhaust | |||
| Oil leakage | Gear oil is too much | Oil filling to the centre of the oil gauge | ||
For more information or enquiry, please contact Environmech Sdn. Bhd.
Contact us: http://www.environmech.com/p/contact-us.html
Website: www.Environmech.com
