Bridge Sludge Thickener Scrap
Introduction :
Bridge Sludge Thickener Scrap is widely used for removing solid matters of flat flow clarifier tanks. Scrap bottom sludge to collection tank skim scum to collection tank. The skimmer can be customized according to requirement. It is widely used in the rectangle setting tank in water supply and drainage engineering.
Works Principles :
Supported by four point and travels along rectangular clarifier bi-side driving on steel rails Bridge Sludge Thickener Scrap bottom sludge to collection tank skim scum to collection tank. The skimmer can be customized according to requirement.
By flow direction can be divide into backward scraping & skimming and forward scraping & skimming. When it done working and travel to beginning the scraper will be lift up then fall down at beginning and scraping restart .
The suspension enters from beginning of rectangular clarifier and spreads to the tank; The particles weight than water will be settle down on bottom and is sucked into the pipe by the suction nozzle then pumped to sludge thickening tank.
Bridge Sludge Thickener consist of bridge frame scraper scraper lift driving system electric control box and steel rails.
Electric supply line and control line can be customized as slide wire or cable.
By flow direction can be divide into backward scraping & skimming and forward scraping & skimming. When it done working and travel to beginning the scraper will be lift up then fall down at beginning and scraping restart .
The suspension enters from beginning of rectangular clarifier and spreads to the tank; The particles weight than water will be settle down on bottom and is sucked into the pipe by the suction nozzle then pumped to sludge thickening tank.
Bridge Sludge Thickener consist of bridge frame scraper scraper lift driving system electric control box and steel rails.
Electric supply line and control line can be customized as slide wire or cable.
Features :
● Truss bridge structure more weight light
● Lower operation cost simple maintenance and management
● New transmission device simple installation● Outdoor type Electrical components safe and reliable can be operated by controlling box on machine or by remote control
● Excellent skimming performance
● The tie rod is connected by a twist joint can be adjusted automatically if the larger resistance is encountered so as to protect the running safety of the whole machine
● The walking wheel can be customized as rubber wheel nylon wheel and steel wheel wet part can be 304 stainless steel.
Technical parameters :
